added tideurrl

README.MD

@@ -1,70 +0,0 @@
-# A selection of information output tools for dmenu
-
-These are a selection of independant tools for displaying various information 
-about system status in dmenu. Some of them i.e. `volurrme` have options (up, down, mute...) 
-which are selectable options in dmenu.  
-
-## Tools
-- `pingclurrk`         performs a single `ping` to a server and returns the response time
-- `batturry`           shows the current battery level
-- `brightnurrs`        shows the current backlight level and gives options to adjust it
-- `volurrme`           shows the current volume level and gives options to adjust and manage it
-- `calendurr`          shows the date
-- `furrytime`          shows the fuzzytime clock
-- `wirelurrs`          shows the state of the wireless network interface. SSID connected to and signal level.
-- `netwurrk`           shows the status and/or the ip address of the network interface card
-- `temperaturr`        shows the current CPU temperature
-- `noteurr`            a simple one liner note taking tool, displaying notes in `dmenu`/`rofi`  
-- `calculaturr`        a calculator, utilising `qalculate` - inspired by [@fedops](https://codeberg.org/fedops/scripts)
-- `emurrji`            an emoji picker
-- `remmina_choosurr`   reads the files in your remmina config directory and allows you to connect to and edit them
-- `translaturr`        utilises libretranslate (you'll need and API key or your own instance) to translate test. Prefix the text with `en>de`, `de>en`, `en>fr`, etc. as you need. Must be compiled with `-d:ssl`
-- `clipurr`            clipboard manager
-- `passwuurd`          a passmenu clone, that works in rofi too
-- `cmd_wrappurr`  a basic tool to run other `dmenu` related tools with uniform styling. 
-  - For example: `dmenu_run`, `clipmenu`, `passmenu` etc.
-
-### Why do all the tools have "urr" in them?
-This is something I was inspired to do after writing `clipurr`… "purr", like a cat... see? 
-So I thought I'd rename everything else to conform to this amazing naming convention… cool eh‽
-
-
-## How to compile
-There are some configuration variables explicit to me, you'll need to change them for you for them to be useful I imagine.  
-Configuration variables are compile - there are no config files or runtime parameters 
-
-Each tool is compiled separately, for example:
-```sh
-nimble install
-or
-nim c pingclurrk
-```
-
-and then run with
-```sh
-./pingclurrk 
-or
-./pingclurrk rofi
-```
-
-## How to use
-Personally, I have these bound to key combinations in i3 and sway. 
-In fact, I have a seperate `bindsym` mode in which all these 
-tools are accessible i.e. `$mod+i` to get to "info" mode then `p` to show pingclock.  
-It's completely up to you how to run them, they're just simple CLI tools.
-  
-### You can also set the volume and brightness levels by typing a numeric figure into the dmenu/rofi input box  
-
-## Dependencies
-- `dmenu` or `rofi`
-- `yad` for calendar
-- basically any tool that's used to gather the information.
-- "tools" for audio etc. (`pamixer`, `ncpamixer`, etc.) can be set in the source
-
-## Full disclosure
-I'm aware my code is messy.  
-I'm aware my code is mostly undocumented.  
-But hopefully these things are simple enough to work out.
-
-
-<a href="https://notnull.click/users/paul" rel="me">Fediverse</a>

archive/clipurr/clipurr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Clipboard manager for X11 or Wayland"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["clipurr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

archive/clipurr/src/clipurr.nim

@@ -1,184 +0,0 @@
-import ../../globurrl
-import std/[strutils,os,db_sqlite,osproc]
-
-const CLIP_DB = WM_TOOLS_DIR & "clipurr_cache.sqlite"
-const KEEP_ITEMS = 15
-
-proc openDBConn(): DBConn
-
-proc addClip(str: var string)
-
-proc killOldRunningProcesses() =
-  let x = execCmdEx("killall wl-paste clipnotify")
-  echo x
-
-
-proc runDaemon() =
-  echo "Starting Daemon..."
-  if wayland:
-    echo "Using Wl-paste"
-    let cwd = getAppDir()
-    let outp = execProcess("wl-paste -n -w " & cwd & "/clipurr set")
-  else:
-    var run = true
-    while run:
-      # TODO; 
-      # Check if WM is running otherwise the TTY will be spammed with "Using Clipnotify" text
-      if XisRunning():
-        echo "Using Clipnotify"
-        let outp = execCmdEx("clipnotify")
-        if outp.exitcode == 0:
-          var content = getCurrentClipboardContent()
-          addClip(content)
-                        
-  echo "Exiting Daemon..."
-    
-proc openDBConn(): DBConn  =
-  let db: DBconn = open(CLIP_DB,"","","")
-  try:
-    db.exec(sql"""create table if not exists 
-                    clip_items (
-                      timestamp DATETIME NOT NULL,
-                      clip      NVARCHAR(500) NOT NULL
-                    )
-               """)
-  except:
-    echo getCurrentExceptionMsg()
-  return db
-
-proc clearHistory() =
-  let db = openDBConn()
-
-  try:
-    db.exec(sql"drop table if exists clip_items")
-  except:
-    echo getCurrentExceptionMsg()
-
-proc maintainDB() =
-  return # order by and offset doesn't work unless certain sqlite compile time options set
-         # will create a different way to do this
-  try:
-    let db = openDBConn()
-    defer: db.close()
-    db.exec(sql"""BEGIN""")
-    db.exec(sql"delete from clip_items order by timestamp desc offset ?", KEEP_ITEMS)
-    db.exec(sql"""COMMIT""")
-  except:
-    echo "Error cleaning DB : " & getCurrentExceptionMsg()
-
-proc escapeClip(str: string): string =
-  var clip = str
-  clip = clip.replace("`","\\`")
-  clip = clip.replace("\\n`","\\\\n`")
-  clip = clip.replace("\x0A","\\x0A")
-  clip = escape(clip)
-  echo "CLIP : ", clip
-  return strip(clip)
-
-proc unescapeClip(str: string): string =
-  var clip = str
-  try:
-    clip = unescape(clip)
-    if contains(clip,"\\x0A"):
-      echo "NEWLINE FOUND"
-      let idx = find(clip, "\\x0A") - 1
-      clip = clip[0 .. idx] & " ... more ..."
-  except:
-    echo getCurrentExceptionMsg()
-
-  return strip(clip)
-
-proc readClipFile(): seq[string] =
-  var clips: seq[string] = @[]
-#  let db = openDBConn()
-  try:
-    let db = openDBConn()
-    defer: db.close()
-    for row in db.fastRows(sql"select distinct(clip) from clip_items order by timestamp desc LIMIT ?", KEEP_ITEMS):
-      var str = unescapeClip(row[0])
-      clips.add(str)
-  except:
-    echo "Error Reading Clip File : " & getCurrentExceptionMsg()
-  return clips
-
-proc addClip(str: var string) =
-  if str == "":
-    return
-  elif str[0] == '\x89':
-    var t = str[1..3]
-    echo "Is a ", $t, " file , not storing"
-    str = "[" & t & " Image] (not stored)"
-  try:
-    str = escapeClip(str)
-    echo "clipboard content : ", str
-    let db = openDBConn()
-    defer: db.close()
-    db.exec(sql"""BEGIN""")
-    db.exec(sql"""insert into clip_items (timestamp, clip)
-                    values (CURRENT_TIMESTAMP, ?)               
-               """, str)
-    db.exec(sql"""COMMIT""")
-  except:
-    echo getCurrentExceptionMsg()
-  return
-
-proc getFullClipboardContent(str: string): string =
-  var full = ""
-  try:
-    let db = openDBConn()
-    defer: db.close()
-    let text = "\"" & replace(str," ... more ...", "%") & "\""
-    let stmt = """
-                  select clip 
-                  from clip_items 
-                  where clip like ?  
-                  order by timestamp desc 
-                  LIMIT 1"""
-    var prep = db.prepare(stmt)
-    prep.bindParams(text)
-    let res = db.getAllRows(prep)
-    for r in res:
-      # may need to switch to a getRow or getValue method here as this is messy
-      full = unescape(r[0])
-      full = replace(full, "\\x0A","\x0A")
-      break 
-    finalize(prep)
-  except:
-    echo "Error Reading Clip File : " & getCurrentExceptionMsg()
-  
-
-  return full
-
-proc showClips() =
-  let clips = readClipFile()
-  let info = newInfo("Clipurr")
-  let option = outputData(info, clips)
-  if option != "":
-    if contains(option, "... more ..."):
-      let full = getFullClipboardContent(option)
-      copyToClipboard(full)
-    else:
-      copyToClipboard(option)
-  return
-
-proc main() =
-  for idx, arg in args:
-    if arg == "daemon":
-      killOldRunningProcesses()
-      runDaemon()
-      return
-    if arg == "set":
-      var content = getCurrentClipboardContent()
-      addClip(content)
-      return
-    if arg == "clear":
-      clearHistory()
-      return
-  showClips()
-  return
-
-block start:
-  if isMainModule:
-    main()
-
-maintainDB()

archive/i3_wurrkspaces/i3_wurrkspaces.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Displays open windows in i3 workspaces"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["i3_wurrkspaces"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

archive/i3_wurrkspaces/src/i3_wurrkspaces.nim

@@ -1,173 +0,0 @@
-import ../../globurrl
-import std/[osproc,json,strutils]
-
-const I3_WORKSPACES = "i3-msg -t get_workspaces"
-const SWAY_WORKSPACES = "swaymsg -t get_workspaces"
-let WORKSPACES = if wayland: SWAY_WORKSPACES else: I3_WORKSPACES
-const I3_TREE = "i3-msg -t get_tree"
-const SWAY_TREE = "swaymsg -t get_tree"
-let TREE = if wayland: SWAY_TREE else: I3_TREE
-const VISIBLE = "#"
-const URGENT = "!"
-const FOCUSED = "%"
-
-type
-  Workspace = object
-    num: int
-    name: string
-    focused: bool
-    visible: bool
-    output: string
-    urgent: bool
-    display_string: string
-    apps: seq[string]
-    applications: seq[Application]
-    application: Application
-  Application = object
-    title: string
-    class: string
-    focused: bool
-    urgent: bool
-
-var my_workspaces: seq[Workspace]
-var current_workspace: int = 0
-
-proc showWorkspaces()
-
-proc buildString(ws: Workspace): string =
-  var str = $ws.num & " |"
-#  if ws.urgent or ws.application.urgent:
-  if ws.application.urgent:
-    str &= URGENT
-  else:
-    str &= " "
-  if ws.focused or ws.application.focused:
-    current_workspace = ws.num
-    str &= FOCUSED
-#  elif ws.visible:
-#    str &= VISIBLE
-  else:
-    str &= " "
-  str &= "| " & ws.output & " | "
-  if ws.application.class != "":
-    str &= ws.application.class & " " & ws.application.title & " | "
-  else:
-    str = ""
-#    for app in ws.applications:
-#      str &= app.class & " " & app.title & " | "
-  return str
-
-proc findWorkspace(workspace: string): Workspace =
-  for ws in my_workspaces:
-    if workspace == ws.display_string:
-      return ws
-
-proc switchWorkspace(workspace: string) =
-  if workspace.contains("%"):
-    return
-  let ws = findWorkspace(workspace)
-  if ws.num == current_workspace:
-    return
-  if wayland:
-    let cmd = "swaymsg workspace " & $ws.num
-    discard execCmd(cmd)
-  else:
-    let cmd = "i3-msg workspace " & $ws.num
-    discard execCmd(cmd)
-  showWorkspaces()
-
-proc getApplication(node: JsonNode, ws: Workspace = Workspace()): Application =
-  var app = Application()
-  let window = node["window_properties"]
-  app.title = window["title"].getStr()
-  app.class = window["class"].getStr()
-  app.focused = node["focused"].getBool()
-  app.urgent = node["urgent"].getBool()
-  #echo ws.num
-  #echo app.title & " " & app.class
-  return app
-
-proc newWorkspace(node: JsonNode): Workspace =
-  return Workspace(
-          num: node["num"].getInt(),
-          name: node["name"].getStr(),
-          focused: node["focused"].getBool(),
-          #visible: w["visible"].getBool(),
-          urgent: node["urgent"].getBool(),
-          output: node["output"].getStr(),
-         )
-
-proc findWorkspacesTree(node: JsonNode, parent: Workspace = Workspace()) =
-  for channel in node["nodes"].getElems():
-    ### move this into for loop if want separate entry per window
-    var ws: Workspace = Workspace()
-    if parent.num > 0:
-      ws = parent
-    elif node{"type"}.getStr() == "workspace":
-      if node["output"].getStr() == "__i3":
-        return
-      ws = newWorkspace(node)
-      echo ws
-    ###
-    echo channel
-    if channel{"window_properties"} != nil:
-      #or (wayland and `something that is the same as window_properties'):
-      let app = getApplication(channel,ws)
-      echo app
-      if ws.name != "":
-        #if app.focused:
-        #  ws.focused = true
-        ws.applications.add(app)
-        ws.application = app
-    elif ws.num > 0 and len(channel{"nodes"}) > 0:
-      findWorkspacesTree(channel,ws)
-    else:
-      findWorkspacesTree(channel)
-    ### move this into for loop if want separate entry per window
-    if ws.name != "":
-      ws.display_string = ws.buildString()
-      if ws.display_string != "":
-        my_workspaces.add(ws)
-    ###
-  return
-
-proc getTree() =
-  let cur_workspaces = execCmdEx(TREE)
-  if cur_workspaces.output != "":
-    let root = parseJson(cur_workspaces.output)
-    findWorkspacesTree(root)
-  return 
-
-proc getWorkspaces(): seq[Workspace] =
-  let cur_workspaces = execCmdEx(WORKSPACES)
-  if cur_workspaces.output != "":
-    let ws = parseJson(cur_workspaces.output)
-    for w in ws:
-      var space = Workspace(
-        num: w["num"].getInt(),
-        name: w["name"].getStr(),
-        focused: w["focused"].getBool(),
-        visible: w["visible"].getBool(),
-        urgent: w["urgent"].getBool(),
-        output: w["output"].getStr()
-      )
-      space.display_string = buildString(space)
-      my_workspaces.add(space)
-  return my_workspaces
-
-proc showWorkspaces() =
-  my_workspaces = @[]
-  getTree()
-  var info = newInfo("Wurrkspaces")
-  var args: seq[string] = @[]
-  for ws in my_workspaces:
-    args.add(ws.display_string)
-  let output = outputData(info,args)
-  if output in args:
-    switchWorkspace(output)
-
-proc main() =
-  showWorkspaces()
-
-if isMainModule:
-  main()

batturry/batturry.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Shows battery percentage using dmenu"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["batturry"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

brightnurrs/brightnurrs.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Shows and controls laptop brightness"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["brightnurrs"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

brightnurrs/src/brightnurrs.nim

@@ -1,116 +0,0 @@
-import ../../globurrl
-import std/[os,strutils,osproc,math]
-
-const backlight = "intel_backlight"
-const default_bg = yellow
-const default_fg = black
-const BACKLIGHT_CMD = "xbacklight"
-const UP_X = BACKLIGHT_CMD & " -inc %v" # %v is amount by
-const DOWN_X = BACKLIGHT_CMD & " -dec %v" # %v is amount by
-const SET_X = BACKLIGHT_CMD & " -set %v" # %v is amount by
-const BACKLIGHT_CMD_WL = "brightnessctl"
-const UP_WL = BACKLIGHT_CMD_WL & " set %v%+"
-const DOWN_WL = BACKLIGHT_CMD_WL & " set %v%-"
-const SET_WL = BACKLIGHT_CMD_WL & " set %v%"
-var CMD = BACKLIGHT_CMD
-var UP = UP_X
-var DOWN = DOWN_X
-var SET = SET_X
-const default_value = "5"
-
-proc getLimit(): int =
-  try:
-    let back_l = readFile("/sys/class/backlight/" & backlight & "/max_brightness")
-    return parseInt(strip(back_l))
-  except:
-    echo "Error getting backlight max : ", getCurrentExceptionMsg()
-  return -1
-
-let limit = getLimit()
-
-proc getDesign(pcnt: float): string =
-  var icon = "🌑"
-  case pcnt:
-    of 85..100:
-      icon = "🌕"
-    of 75..85:
-      icon = "🌖"
-    of 50..75:
-      icon = "🌗"
-    of 35..50:
-      icon = "🌘"
-    else:
-      icon = "🌑"
-  let percent = toInt(round(pcnt,0))
-  let text = icon & " " & $percent & "%"
-  return text
-
-proc brightnessUp() =
-  let cmd = replace(UP,"%v",default_value)
-  discard execCmd(cmd)
-proc brightnessDown() =
-  let cmd = replace(DOWN,"%v",default_value)
-  discard execCmd(cmd)
-
-proc getBrightness*(run_once: bool = false) =
-  var last_pcnt: float = 0
-  while true:
-    let current = parseInt(strip(readFile("/sys/class/backlight/" & backlight & "/actual_brightness")))
-    let pcnt = (current/limit)*100
-    if pcnt != last_pcnt:
-      let text = getDesign(pcnt)
-      var data = newInfo("Brightnurrs")
-      data.full_text = text
-      data.selected_bg = default_fg
-      data.selected_fg = default_bg
-      # i3bar stuff
-      data.border = default_fg
-      let args = @["up", "down"]
-      let option = outputData(data,args)
-      if option in args:
-        case option:
-          of "up":
-            brightnessUp()
-            getBrightness(true)
-          of "down":
-            brightnessDown()
-            getBrightness(true)
-      else:
-        try:
-          let i = parseInt(option)
-          let cmd = replace(SET,"%v",$i)
-          discard execCmd(cmd)
-          getBrightness(true)
-        except:
-          echo getCurrentExceptionMsg()
-
-      if run_once:
-        break
-    if stoploop:
-      break
-    last_pcnt = pcnt
-    sleep(1000)
-
-proc main() =
-  if limit == -1:
-    switchTwmMode()
-    return
-  getBrightness()
-
-if isMainModule:
-  block start:
-    if wayland:
-      CMD = BACKLIGHT_CMD_WL
-      UP = UP_WL
-      DOWN = DOWN_WL
-      SET = SET_WL
-    for arg in args:
-      case arg:
-        of "up":
-          brightnessUp()
-          break start
-        of "down":
-          brightnessDown()
-          break start
-
-    main()

calculaturr/calculaturr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A simple dmenu calculator"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["calculaturr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

calendurr/calendurr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Displays the date in dmenu"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["calendurr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

cmd_wrappurr/cmd_wrappurr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A Command wrapper thing - i.e. run clipmenu/passmenu into dmenu with styling, sucks really"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["cmd_wrappurr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

cmd_wrappurr/src/cmd_wrappurr.nim

@@ -1,22 +0,0 @@
-import ../../globurrl
-import std/[strutils,osproc]
-
-# Basically just a wrapper to style passmenu nicely
-proc main() =
-  var info = newInfo(capitalizeAscii(run_command))
-  let cmd = genMenuCmd(info)
-  discard  execCmd(cmd)
-  return
-
-if isMainModule:
-  globurrl.wrappurr = true
-  for idx, arg in args:
-    case arg:
-      of "-r", "--run":
-        run_command = args[idx + 1]
-        break
-      else:
-        echo "No command given, please run again with `[-r|--run] __cmd__`"
-
-  if run_command != "":
-    main()

compile_urrl.sh

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build () {
-    dir="$1"
-    i="$2"
-    cd "./$dir" || exit
-    f=$(echo "$dir" | sed 's/\.\///')
-    nimble install -y
-    if [[ $i == "install" ]]; then
-        cp -v "$f" "$HOME/.local/bin/$f"
-    fi
-    cd ../
-}
-
-if [[ $2 != "" ]]; then
-    build "$2" "$1"
-    exit
-fi
-for dir in ./*; do
-    if [ -d "$dir" ]; then
-        if [[ "$dir" == "./" ]]; then
-            continue
-        fi
-        build "$dir" "$1"
-    fi
-done

emurrji/emurrji.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "An emoji picker for dmenu/rofi"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["emurrji"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

furrytime/furrytime.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Displays the fuzzy time in dmenu"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["furrytime"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

globurrl.nim

@@ -1,278 +0,0 @@
-import std/[os,osproc,strutils,json,rdstdin,marshal]
-
-type
-  Info* = object
-    title*: string
-    selected_fg*: string
-    selected_bg*: string
-    unselected_fg*: string
-    unselected_bg*: string
-    full_text*: string
-    # next few are for i3bar use
-    border*: string
-    background*: string
-    color*: string
-    html_text*: string
-    short_text*: string
-    args*: seq[string]
-  Menu = object
-    command: string
-    bottom: string
-    grab_kb: string
-    i_case: string
-    lines_shown: string
-    monitor: string
-    prompt: string
-    font: string
-    norm_bg: string
-    norm_fg: string
-    sel_bg: string
-    sel_fg: string
-    extra_cmd: string
-  Tool* = enum
-    ROFI = "rofi", DMENU = "dmenu"
-
-const WM_TOOLS_DIR* = getHomeDir() & ".wm_tools/"
-const WM_TOOLS_SYNC_DIR = getHomeDir() & "/Nextcloud/.wm_tools_sync/"
-const background* = "#000000"
-const backgroundalt* = "#bb222222"
-const backgroundalt2* = "#bb333333"
-const foreground* = "#dfdfdf"
-const foregroundalt* = "#777"
-const foregroundalt2* = "#ccc"
-const black* = "#000000"
-const white* = "#FFFFFF"
-const yellow* = "#ffb52a"
-const red* = "#e60053"
-const purple* = "#9f78e1" 
-const blue* = "#0a6cf5"
-const lightblue* = "#7296EF"
-const lighterblue* = "#B5DDF7"
-const green* = "#4b9901"
-const lightgreen* = "#00ff00"
-const grey* = "#dfdfdf"
-const darkgrey* = "#444"
-const primary* = yellow
-const secondary* = red
-const alert* = "#bd2c40"
-const font = "Hermit-12"
-const MAX_LINES = 20
-var loop* = false
-var stoploop* = true
-var tool* = ROFI
-var wrappurr* = false
-var run_command* = ""
-var wayland* = false
-
-proc newInfo*(str: string = "Info"): Info =
-  var title = str
-  if tool == ROFI:
-    title = title & " : "
-  return Info(
-    title: title,
-    selected_fg: black,
-    selected_bg: white,
-    unselected_fg: white,
-    unselected_bg: black,
-    # next few are for i3bar use
-    border: white,
-    background: black,
-    color: foreground,
-    )
-
-proc newMenuConfig(cmd: Tool = ROFI): Menu =
-  var run = $cmd
-  var menu = Menu()
-  menu.command = run
-  if cmd == ROFI:
-    menu.command &= " -dmenu"
-  menu.prompt = "-p"
-  menu.i_case = "-i"
-  menu.lines_shown = "-l"
-  return menu
-
-proc newRofiConfig(cmd: Tool = ROFI): Menu =
-  var run = cmd
-  var menu = newMenuConfig(run)
-  #menu.extra_cmd = "-markup-rows" #-kb-row-select \"Tab\" -kb-row-tab \"\""
-  return menu
-
-proc newDmenuConfig(cmd: Tool = DMENU): Menu =
-  var run = cmd
-  var menu = newMenuConfig(run)
-  menu.bottom = "-b"
-  menu.grabkb = "-f"
-  menu.monitor = "-m"
-  menu.font = "-fn"
-  menu.norm_bg = "-nb"
-  menu.norm_fg = "-nf"
-  menu.sel_bg = "-sb"
-  menu.sel_fg = "-sf"
-  return menu
-
-proc newMenu(): Menu =
-  #if wrappurr:
-  #  return newDmenuConfig(run_command)
-  case tool:
-    of ROFI:
-      return newRofiConfig()
-    of DMENU:
-      return newDmenuConfig()
-  return newMenuConfig()
-
-proc debugLog*(str: string) =
-  let f = open("/tmp/debug.txt",fmAppend)
-  defer: f.close()
-  f.writeLine(str)
-
-proc checkWayland() =
-  if getEnv("XDG_SESSION_TYPE") == "wayland":
-    wayland = true
-
-proc XisRunning*(): bool =
-  if getEnv("XAUTHORITY") != "":
-    echo "X IS RUNNING"
-    echo getEnv("XAUTHORITY")
-    return true
-  return false
-
-proc clearInput*(count: int = 1) =
-  for x in countup(1, count):
-    discard readLineFromStdin("")
-
-proc getArguments*(): seq[string] =
-  let args = commandLineParams()
-  return args
-
-proc stripQuotes*(str: string): string =
-  return replace(str,"\"",""")
-
-proc quote*(str: string): string =
-  var text = str
-  # May need to put some further work to escape some special chars here
-  text = stripQuotes(text)
-  
-  # Put leading and ending quote marks in
-  return " \"" & text & "\" "
-  #       ^  Add a spaces  ^ so the previous flag isn't touching
-  
- 
-proc markup(str: string): string =
-  var text = str
-
-  return text
-
-proc genMenuCmd*(data: Info, opts: varargs[string], rofi: bool = false): string =
-  # Build dmenu/rofi command
-  var cmd = ""
-  var x_lines = len(opts) + 1
-  # if the text is empty, we don't want to create a menu item of it
-  if data.full_text != "":
-    let text = markup(data.full_text)
-    cmd &= text & "\n"
-  else:
-    x_lines -= 1
-  for opt in opts:
-    let text = markup(opt)
-    cmd = cmd & text & "\n"
-  cmd.removeSuffix("\n")
-
-  if x_lines > MAX_LINES:
-    x_lines = MAX_LINES
-
-  cmd = "echo -e" & quote(cmd) & " | "
-
-  var menu = newMenu()
-  cmd = cmd & menu.command & " "
-  cmd = cmd & menu.extra_cmd & " "
-  cmd = cmd & menu.i_case & " "
-  cmd = cmd & menu.lines_shown & " " & $x_lines & " "
-  cmd = cmd & menu.prompt & quote(data.title)
-  cmd = cmd & menu.norm_bg & quote(data.unselected_bg)
-  cmd = cmd & menu.norm_fg & quote(data.unselected_fg)
-  cmd = cmd & menu.sel_bg & quote(data.selected_bg)
-  cmd = cmd & menu.sel_fg & quote(data.selected_fg)
-  cmd = cmd & menu.font & quote(font)
-  echo cmd
-  return cmd
-
-
-
-proc runMenu*(data: Info, opts: varargs[string], dmenu: bool = false): string =
-  let cmd = genMenuCmd(data, opts, dmenu)
-  #echo cmd
-  #
-  # Run command and get output
-  var output = execCmdEx(cmd)
-  output.output.stripLineEnd()
-  return output.output
-
-proc copyToClipboard*(str: string) =
-    if wayland:
-      discard execCmd("wl-copy " & str)
-    else:
-      discard execCmd("echo -n " & quote(str) & " | xclip -selection clipboard")
-
-proc getCurrentClipboardContent*(): string =
-  var str = ""
-  if wayland:
-    let cur = execCmdEx("wl-paste")
-    if cur.exitcode == 0:
-      str = cur[0]
-    else:
-      echo cur
-  else:
-    let cur = execCmdEx("xsel -o -b")
-    if cur.exitcode == 0:
-      str = cur[0]
-    else:
-      echo cur
-  return strip(str)
-
-proc outputData*(data: Info, args: varargs[string]): string {.discardable.} =
-  var output = ""
-  if tool == DMENU:
-    output = runMenu(data,args, dmenu = true)
-  elif loop:
-    # mainly for i3bar/i3blocks compatible output
-    var j_data = data
-    if j_data.html_text != "":
-      j_data.full_text = j_data.html_text
-    echo $$j_data
-  else:
-    # if all else fails, use dmenu (default)
-    output = runMenu(data,args)
-  return output
-
-proc getSyncDir*(): string =
-  if existsOrCreateDir(WM_TOOLS_SYNC_DIR):
-    echo "Sync Dir already exists"
-    return WM_TOOLS_SYNC_DIR
-  return WM_TOOLS_SYNC_DIR
-
-proc checkCacheDir() =
-  if not dirExists(WM_TOOLS_DIR):
-    createDir(WM_TOOLS_DIR)
-
-# At Start up:
-checkCacheDir()
-
-
-let args* = getArguments()
-for idx, arg in args:
-  case arg:
-    of "noloop":
-      stoploop = true
-    of "i3bar":
-      # I've kind of changed from using an i3bar to using #nobar so i3bar
-      # isn't really supported any more but this is here for backwards compatibility
-      loop = true
-      stoploop = false
-    of "dmenu":
-      stoploop = true
-      tool = DMENU
-    of "rofi":
-      stoploop = true
-      tool = ROFI
-
- 

install.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+nimble install -y
+cp -v "wmtools" "$HOME/.local/bin/wmtools"

netwurrk/netwurrk.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Display NIC IP address and link to manage NICs"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["netwurrk"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

passwurrd/passwurrd.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A new awesome nimble package"
-license       = "MIT"
-srcDir        = "src"
-bin           = @["passwurrd"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

pingclurrk/pingclurrk.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A ping clock - display current ping time"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["pingclurrk"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

pw_generaturr/nimbledeps/nimbledata2.json

@@ -1,4 +0,0 @@
-{
-  "version": 1,
-  "reverseDeps": {}
-}

pw_generaturr/pw_generaturr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A new awesome nimble package"
-license       = "AGPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["pw_generaturr"]
-
-
-# Dependencies
-
-requires "nim >= 2.0.0"

pw_generaturr/src/pw_generaturr.nim

@@ -1,65 +0,0 @@
-
-#import ../../globurrl
-
-import httpclient
-import json
-import strutils
-import random
-import parseopt
-import os
-
-var length = 4
-var number = 10
-var word_len = 5
-
-proc getNumber(size: int = 4): string =
-  var num = ""
-  for _ in countup(1,size):
-    randomize()
-    let roll = rand(0..9)
-    num &= $roll
-  return num
-
-proc parsePw(body: string) =
-  let j = body.parseJson
-  for pass in j.getElems:
-    var p = pass.getStr.capitalizeAscii
-    p &= getNumber(length)
-    echo p
-  
-proc getPW() =
-  var c = newHttpClient()
-  try:
-    let url = "https://random-word-api.herokuapp.com/word?number=" & $number & "&length=" & $word_len
-    echo url
-    let resp = c.get(url)
-    if resp.status == $Http200:
-      parsePw(resp.body)
-
-  except:
-    echo getCurrentExceptionMsg()
-
-proc parseArgs() =
-  var p = initOptParser(commandLineParams())
-  while true:
-    p.next()
-    case p.kind
-    of cmdEnd: break
-    of cmdShortOption, cmdLongOption:
-      if p.val == "":
-        #echo "Option: ", p.key
-        discard
-      else:
-        #echo "Option and value: ", p.key, ", ", p.val
-        case p.key
-        of "length":
-          word_len = parseInt(p.val)
-        of "number":
-          number = parseInt(p.val)
-    of cmdArgument:
-      #echo "Argument: ", p.key
-      discard
-    
-if isMainModule:
-  parseArgs()
-  getPW()

remmina_choosurr/remmina_choosurr.nimble

@@ -1,14 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A Remmina client tool and opener"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["remmina_choosurr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"
-requires "configparser >= 0.1.0"

screenshurrt/screenshurrt.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "A screenshot client, works on both X11 and Wayland"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["screenshurrt"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

src/common.nim

@@ -0,0 +1,11 @@
+import model/config
+import model/tool
+import model/info
+
+export config
+export tool
+export info
+
+var myConfig* = newConfig()
+
+

src/common/colours.nim

@@ -0,0 +1,22 @@
+
+const background* = "#000000"
+const backgroundalt* = "#bb222222"
+const backgroundalt2* = "#bb333333"
+const foreground* = "#dfdfdf"
+const foregroundalt* = "#777"
+const foregroundalt2* = "#ccc"
+const black* = "#000000"
+const white* = "#FFFFFF"
+const yellow* = "#ffb52a"
+const red* = "#e60053"
+const purple* = "#9f78e1" 
+const blue* = "#0a6cf5"
+const lightblue* = "#7296EF"
+const lighterblue* = "#B5DDF7"
+const green* = "#4b9901"
+const lightgreen* = "#00ff00"
+const grey* = "#dfdfdf"
+const darkgrey* = "#444"
+const primary* = yellow
+const secondary* = red
+const alert* = "#bd2c40"

src/dispatcher.nim

@@ -0,0 +1,55 @@
+
+import common
+import util/furrytime
+import util/pingclock
+import util/batturry
+import util/volurrme
+import util/netwurrk
+import util/wirelurrs
+import util/emurrji
+import util/calendurr
+import util/remminurr
+import util/passwurrd
+import util/pw_generaturr
+import util/temperaturr
+import util/screenshurrt
+import util/calculaturr
+import util/brightnurrs
+import util/tideurrl
+
+proc dispatch*(cfg: Config) =
+  case cfg.run
+  of FurryTime:
+    furrytime.go()
+  of PingClock:
+    pingclock.go()
+  of Batturry:
+    batturry.go()
+  of Volurrme:
+    volurrme.go()
+  of Netwurrk:
+    netwurrk.go()
+  of Wirelurrs:
+    wirelurrs.go()
+  of Emurrji:
+    emurrji.go()
+  of Calendurr:
+    calendurr.go()
+  of Remminurr:
+    remminurr.go()
+  of Passwurrd:
+    passwurrd.go()
+  of PasswurrdGeneraturr:
+    pw_generaturr.go()
+  of Temperaturr:
+    temperaturr.go()
+  of Screenshurrt:
+    screenshurrt.go()
+  of Calculaturr:
+    calculaturr.go()
+  of Brightnurrs:
+    brightnurrs.go()
+  of Tideurrl:
+    tideurrl.go()
+  else:
+    echo "No valid run command given"

src/model/brightness.nim

@@ -0,0 +1,6 @@
+
+type
+  BrightnessArg* = enum
+    None,
+    BrightUp,
+    BrightDown

src/model/config.nim

@@ -0,0 +1,49 @@
+import os
+import parsetoml
+
+import tool
+import screenshot
+
+type
+  Config* = ref object
+    exec*: string
+    run*: Tool
+    max_lines*: int
+    prepend*: bool
+    screenshot_tool*: ScreenshotTool
+
+let config_dir* = getHomeDir() & ".config/wm_tools/"
+let config_file* = config_dir & "config.toml"
+
+proc `$`(c: Config): string =
+  var str = "exec = \"" & c.exec & "\"\n"
+  str &= "prepend = " & $c.prepend & "\n"
+  str &= "screenshot_tool = \"" & $c.screenshot_tool & "\"\n"
+  str &= "max_lines = " & $c.max_lines
+  str &= "\n"
+  return str
+
+proc newConfig*(): Config =
+  var cfg = Config()
+  cfg.exec = "rofi -dmenu"
+  cfg.prepend = true
+  cfg.screenshot_tool = Maim
+  cfg.max_lines = 20
+
+  discard existsOrCreateDir(config_dir)
+  if not fileExists(config_file):
+    writeFile(config_file,$cfg)
+  else:
+    let content = readFile(config_file)
+    try:
+      let toml = parseString(content)
+      if toml.hasKey("exec"):
+        cfg.exec = toml["exec"].getStr
+      if toml.hasKey("max_lines"):
+        cfg.max_lines = toml["max_lines"].getInt
+      if toml.hasKey("screenshot_tool"):
+        cfg.screenshot_tool = toml["screenshot_tool"].getStr.toScreenshotTool
+    except:
+      echo "Error with Config File:"
+      echo getCurrentExceptionMsg()
+  return cfg

src/model/info.nim

@@ -0,0 +1,11 @@
+type
+  Info* = object
+    title*: string
+    full_text*: string
+    html_text*: string
+    short_text*: string
+    args*: seq[string]
+
+proc newInfo*(str: string = "Info"): Info =
+  var title = str
+  return Info(title: title)

src/model/pwgen.nim

@@ -0,0 +1,14 @@
+
+type
+  PWGen* = object
+    to_terminal*: bool
+    word_len*: int
+    digits*: int
+    number*: int
+
+proc newPWGen*(): PWGen =
+  var pw = PWGen()
+  pw.word_len = 5
+  pw.digits = 4
+  pw.number = 10
+  return pw

src/model/screenshot.nim

@@ -0,0 +1,72 @@
+
+import sequtils
+import strutils
+
+type
+  Screenshot* = object
+    size*: ScreenshotSize
+    tool*: ScreenshotTool
+  ScreenshotSize* = enum
+    None = ""
+    Region = "region",
+    Full = "fullscreen",
+    Window = "window"
+  ScreenshotTool* = enum
+    None = ""
+    Maim = "maim"
+
+proc newScreenshot*(): Screenshot =
+  var ss = Screenshot()
+  ss.tool = Maim
+  ss.size = None
+  return ss
+
+proc toScreenshotSize*(str: string): ScreenshotSize =
+  case str
+  of "region": return Region
+  of "fullscreen": return Full
+  of "window": return Window
+  else: return None
+
+proc isScreenshotSize*(str: string): bool =
+  return str.toScreenshotSize != None
+
+proc ScreenshotSizes*(): seq[string] =
+  var sizes: seq[string] = @[]
+  for item in ScreenshotSize.toSeq:
+    if item != None:
+      sizes.add($item)
+  return sizes
+
+proc toScreenshotTool*(str: string): ScreenshotTool =
+  case str
+  of "maim": return Maim
+  else: return None
+
+proc isScreenshotTool*(str: string): bool =
+  return str.toScreenshotTool != None
+
+proc command*(tool: ScreenshotTool): string =
+  case tool
+  of Maim: return "maim -u %s --format png %f"
+  else: return ""
+
+proc activeWindowCommand*(tool: ScreenshotTool): string =
+  var cmd = tool.command()
+  # where %s is an extra flag or process, i.e. xdotool for getting active window
+  case tool
+  of Maim:
+    cmd = cmd.replace("%s","-i $(xdotool getactivewindow)")
+  else: return cmd
+  return cmd
+
+proc regionCommand*(tool: ScreenshotTool): string =
+  var cmd = tool.command()
+  case tool
+  of Maim:
+    cmd = cmd.replace("%s","-s")
+  else: return cmd
+  return cmd
+
+const CLIPBOARD_CMD* = "xclip -selection clipboard -t image/png"
+

src/model/tides.nim

@@ -0,0 +1,22 @@
+import times
+
+const TIDE_URL* = "https://www.tidetimes.org.uk/%LOC-tide-times"
+const DEFAULT_LOC* = "exmouth-dock"
+
+type 
+  Tide* = ref object
+    state*: string
+    time*: string
+    height*: string
+    tomorrow*: bool
+  TideList* = ref object
+    tides*: seq[Tide]
+    url*: string
+    last_updated*: DateTime
+    location*: string
+
+proc newTideList*(): TideList =
+  var tl = TideList()
+  tl.url = TIDE_URL
+  tl.location = DEFAULT_LOC
+  return tl

src/model/tool.nim

@@ -0,0 +1,20 @@
+
+type
+  Tool* = enum
+    None,
+    FurryTime,
+    PingClock,
+    Batturry,
+    Volurrme,
+    Netwurrk,
+    Wirelurrs,
+    Emurrji,
+    Calendurr,
+    Remminurr,
+    Passwurrd,
+    PasswurrdGeneraturr,
+    Temperaturr,
+    Screenshurrt,
+    Calculaturr,
+    Brightnurrs,
+    Tideurrl

src/model/volume.nim

@@ -0,0 +1,4 @@
+
+type
+  VolArg* = enum
+    None, VolUp, VolDown, VolMute

src/output.nim

@@ -0,0 +1,63 @@
+import osproc
+import strutils
+
+import common
+
+proc stripQuotes(str: string): string =
+  var text = replace(str,"\"",""")
+  return text
+
+proc quote*(str: string): string =
+  var text = str
+  # May need to put some further work to escape some special chars here
+  text = stripQuotes(text)
+  
+  # Put leading and ending quote marks in
+  return " \"" & text & "\" "
+  #       ^  Add a spaces  ^ so the previous flag isn't touching
+  
+proc markup(str: string): string =
+  # Placeholder proc for future use
+  var text = stripQuotes(str)
+  return text
+
+proc copyToClipboard*(str: string): bool {.discardable.} =
+  let ok = execCmd("echo -n " & quote(str) & " | xclip -selection clipboard")
+  return ok == 0
+
+proc genMenuCmd(data: Info, opts: varargs[string]): string =
+  var cmd = ""
+  var x_lines = len(opts) + 1
+  # if the text is empty, we don't want to create a menu item of it
+  if data.full_text != "":
+    let text = markup data.full_text
+    cmd &= text & "\n"
+  else:
+    x_lines -= 1
+  for opt in opts:
+    let text = markup opt
+    cmd &= text & "\n"
+  
+  cmd.removeSuffix("\n")
+  
+  if x_lines > myConfig.max_lines: x_lines = myConfig.max_lines
+
+  if myConfig.prepend:
+    cmd = "echo -e" & quote(cmd) & "| "
+    cmd &= myConfig.exec
+    cmd &= " -i" # set case insensitive
+    cmd &= " -p" & quote(data.title)
+    cmd &= "-l " & $x_lines
+  echo "Sending command:\n" & cmd
+  return cmd
+
+proc runExec(data: Info, opts: varargs[string]): string =
+  let cmd = genMenuCmd(data, opts)
+  var output = execCmdEx(cmd)
+  echo "Output:\n" & $output
+  output.output.stripLineEnd()
+  return output.output
+
+proc outputData*(data: Info, args: varargs[string,`$`]): string {.discardable.} =
+  var output = runExec(data,args)
+  return output

src/parser.nim

@@ -0,0 +1,179 @@
+import os
+
+import argparse
+
+import common
+import model/pwgen
+import model/volume
+import model/brightness
+import model/screenshot
+import model/tides
+
+proc parseArgs*() =
+  let params =  commandLineParams()
+  var p = newParser:
+    help("WMTools : a set of tools to output option to your program of choice i.e. Rofi")
+    arg("input",help="the tool to run, i.e. furrytime, pingclock, volurrme, etc.")
+    arg("others", nargs = -1)
+  try:
+    var opts = p.parse(params)
+    case opts.input
+    of "furrytime", "fuzzytime", "time":
+      myConfig.run = FurryTime
+    of "pingclock", "pingclurrk", "ping":
+      myConfig.run = PingClock
+    of "batturry", "battery", "bat":
+      myConfig.run = Batturry
+    of "volurrme", "volume", "vol":
+      myConfig.run = Volurrme
+    of "netwurrk", "network", "net":
+      myConfig.run = Netwurrk
+    of "wirelurrs", "wireless", "wifi":
+      myConfig.run = Wirelurrs
+    of "emurrji", "emoji":
+      myConfig.run = Emurrji
+    of "calendurr", "calender", "cal":
+      myConfig.run = Calendurr
+    of "remminurr", "remmina", "rdp", "rem":
+      myConfig.run = Remminurr
+    of "passwurrd", "password", "pw":
+      myConfig.run = Passwurrd
+    of "passwurrdgeneraturr", "passwordgenerator", "pwgen":
+      myConfig.run = PasswurrdGeneraturr
+    of "temperaturr", "temperature", "temp":
+      myConfig.run = Temperaturr
+    of "screenshurrt", "screenshot", "screeny":
+      myConfig.run = Screenshurrt
+    of "calculaturr", "calculator", "calc":
+      myConfig.run = Calculaturr
+    of "brightnurrs", "brightness", "bright":
+      myConfig.run = Brightnurrs
+    of "tideurrl", "tides":
+      myConfig.run = Tideurrl
+    else:
+      echo p.help
+      quit(1)
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+
+proc parseVolArgs*(): VolArg =
+  var arg: VolArg
+  let params = commandLineParams()
+  var p = newParser:
+    help("Args for volurrme")
+    arg("volurrme",help="can only ever be 'volurrme' as you won't have gotten this far otherwise")
+    arg("adjust",help="up, down, or mute",default=some(""))
+  try:
+    var opts = p.parse(params)
+    case opts.adjust
+    of "volup", "up":
+      arg = VolUp
+    of "voldown", "down":
+      arg = VolDown
+    of "mute","volmute":
+      arg = VolMute
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+  return arg
+
+proc parseBrightnessArgs*(): BrightnessArg =
+  var arg: BrightnessArg
+  let params = commandLineParams()
+  var p = newParser:
+    help("Args for volurrme")
+    arg("brightnurrs",help="can only ever be 'brightnurrs' as you won't have gotten this far otherwise")
+    arg("adjust",help="up, down, or mute",default=some(""))
+  try:
+    var opts = p.parse(params)
+    case opts.adjust
+    of "up":
+      arg = BrightUp
+    of "down":
+      arg = BrightDown
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+  return arg
+
+proc parsePWGenArgs*(): PWGen =
+  var gen = newPWGen()
+  let params =  commandLineParams()
+  var p = newParser:
+    help("Args for pw_generaturr")
+    arg("pwgen",help="can only ever be 'pwgen' as you won't have gotten this far otherwise")
+    flag("-o","--output",help="outputs to terminal instead of something else")
+    option("-l","--length",help="Length of the word part of the password")
+    option("-d","--digits",help="Length of the number part of the password",default=some(""))
+    option("-n","--number",help="Number of passwords to return")
+  try:
+    var opts = p.parse(params)
+    if opts.length != "":
+      gen.word_len = parseInt(opts.length)
+    if opts.digits != "":
+      gen.digits = parseInt(opts.digits)
+    if opts.number != "":
+      gen.number = parseInt(opts.number)
+    gen.to_terminal = not opts.output
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+  return gen
+
+proc parseScreenshotArgs*(): Screenshot =
+  var ss = newScreenshot()
+  ss.tool = myConfig.screenshot_tool
+  let params =  commandLineParams()
+  var p = newParser:
+    help("Args for screenshurrt")
+    arg("screenshurrt",help="can only ever be 'screenshurrt' as you won't have gotten this far otherwise")
+    option("-s","--size",help="size/region i.e. region, fullscreen or window")
+  try:
+    var opts = p.parse(params)
+    if opts.size != "":
+      ss.size = opts.size.toScreenshotSize()
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+  return ss
+
+proc parseTideurrlArgs*(): TideList =
+  var t = newTideList()
+  let params =  commandLineParams()
+  var p = newParser:
+    help("Args for tideurrl")
+    arg("tideurrl",help="can only ever be 'tideurrl' as you won't have gotten this far otherwise")
+    option("-l","--loc",help="location name")
+  try:
+    var opts = p.parse(params)
+    if opts.loc != "":
+      t.location = opts.loc
+  except ShortCircuit as err:
+    if err.flag == "argparse_help":
+      echo err.help
+      quit(1)
+  except UsageError:
+    stderr.writeLine getCurrentExceptionMsg()
+    quit(1)
+  return t

src/util/batturry.nim

@@ -1,5 +1,8 @@
-import ../../globurrl
-import std/[strutils,os]
+import strutils
+
+import ../common
+import ../common/colours
+import ../output
 
 const battery = "BAT0"
 const ok_fg = lightgreen
@@ -43,7 +46,7 @@ proc getCharge(): int =
     echo "Error getting battery level : " & getCurrentExceptionMsg()
   return charge
 
-proc getDesign(charge: int, state: bool): (string, string, string, string, string) =
+proc getDesign(charge: int, state: bool): string =
   var icon = " "
   var icon_colour = ok_fg
   var col = default_fg
@@ -81,46 +84,25 @@ proc getDesign(charge: int, state: bool): (string, string, string, string, strin
         icon = "x "
 
   let main_text = icon & " " & $charge & "%"
-  # This next line is here for i3bar purposes
-  let html_text = "<span foreground=\"" & icon_colour & "\">" & icon & "</span>" & $charge & "%" 
 
-  return (html_text,main_text, col, bg, border)
+  return main_text
 
 proc getOutput(charge: int, state: bool): Info =
-  let (html_text,main_text,col,bg_col,highlight_col) = get_design(charge, state)
+  let main_text = get_design(charge, state)
   var data = newInfo("Batturry")
+  # TODO check if html text works with rofi
   data.full_text = main_text
-  data.selected_bg = highlight_col
-  data.selected_fg = col # may just want `black` here
-  # i3bar stuff
-  data.html_text = html_text
-  data.color = col
-  data.border = highlight_col
-  data.background = bg_col
   return data
 
 
 proc getBatteryInfo() =
-  var last_charge = -1
-  var last_state = false
-  while true:
   let charge = getCharge()
   let state = isCharging()
-    if charge != last_charge or state != last_state:
   let data = getoutput(charge, state)
   outputData(data)
-      last_charge = charge
-      last_state = state
-    if stoploop:
-      break
-    sleep(1000)
 
-proc main() =
+proc go*() =
   if batteryExists():
     getBatteryInfo()
-  else:
-    switchTwmMode()
 
-if isMainModule:
-  main()
 

src/util/brightnurrs.nim

@@ -0,0 +1,98 @@
+import os
+import strutils
+import osproc
+import math
+
+import ../common
+import ../parser
+import ../model/brightness
+import ../output
+
+#const backlight = "intel_backlight"
+const BACKLIGHT_CMD = "xbacklight"
+const UP = BACKLIGHT_CMD & " -inc %v" # %v is amount by
+const DOWN = BACKLIGHT_CMD & " -dec %v" # %v is amount by
+const SET = BACKLIGHT_CMD & " -set %v" # %v is amount by
+const default_value = "5"
+
+proc getBacklight(): string = 
+  for dir in walkDir("/sys/class/backlight"):
+    echo dir.path
+    var bl = dir.path.replace("/sys/class/backlight/","")
+    echo bl
+    return bl
+
+proc getLimit(backlight: string): int =
+  try:
+    if backlight != "":
+      let back_l = readFile("/sys/class/backlight/" & backlight & "/max_brightness")
+      return parseInt(strip(back_l))
+  except:
+    echo "Error getting backlight max : ", getCurrentExceptionMsg()
+  return -1
+
+
+proc getDesign(pcnt: float): string =
+  var icon = "🌑"
+  case pcnt:
+    of 85..100:
+      icon = "🌕"
+    of 75..85:
+      icon = "🌖"
+    of 50..75:
+      icon = "🌗"
+    of 35..50:
+      icon = "🌘"
+    else:
+      icon = "🌑"
+  let percent = toInt(round(pcnt,0))
+  let text = icon & " " & $percent & "%"
+  return text
+
+proc brightnessUp() =
+  let cmd = replace(UP,"%v",default_value)
+  discard execCmd(cmd)
+proc brightnessDown() =
+  let cmd = replace(DOWN,"%v",default_value)
+  discard execCmd(cmd)
+
+proc getBrightness*(backlight: string) =
+  var data = newInfo("Brightnurrs")
+  if backlight == "":
+    data.full_text = "No Backlight Found"
+    discard outputData(data)
+    quit(1)
+  let limit = getLimit(backlight)
+  let current = parseInt(strip(readFile("/sys/class/backlight/" & backlight & "/actual_brightness")))
+  let pcnt = (current/limit)*100
+  let text = getDesign(pcnt)
+  data.full_text = text
+  let args = @["up", "down"]
+  let option = outputData(data,args)
+  if option in args:
+    case option:
+      of "up":
+        brightnessUp()
+        backlight.getBrightness()
+      of "down":
+        brightnessDown()
+        backlight.getBrightness()
+  else:
+    try:
+      let i = parseInt(option)
+      let cmd = replace(SET,"%v",$i)
+      discard execCmd(cmd)
+      backlight.getBrightness()
+    except:
+      echo getCurrentExceptionMsg()
+
+proc go*() =
+  let backlight = getBacklight()
+  let barg = parseBrightnessArgs()
+  case barg:
+    of BrightUp:
+      brightnessUp()
+    of BrightDown:
+      brightnessDown()
+    else:
+      backlight.getBrightness()

src/util/calculaturr.nim

@@ -1,9 +1,14 @@
-import ../../globurrl
-import std/[osproc,strutils,sequtils]
+import osproc
+import strutils
+import sequtils
+
+import ../common
+import ../output
 
 # using qalc as it has a lot of nice inbuilt features
 # may be nice to make it totally non-dependant on other things though
 
+const exitSeq = @["---","exit"]
 proc doCalculation(calc: string) =
   var info = newInfo("Calculaturr")
   let ans_cmd_terse = "echo \"" & calc & "\" | qalc +u8 -terse -color=never | awk '!/^>/ && !/^$/ {gsub(/^[ \\t]+|[ \\t]+$/, \"\", $0); print}'"
@@ -14,17 +19,16 @@ proc doCalculation(calc: string) =
   ans_terse.output.stripLineEnd()
   let answers = @[strip(ans_full.output),
                   strip(ans_terse.output)]
-  let args = concat(answers,@["exit"])
+  let args = concat(answers,exitSeq)
   var cmd = outputData(info, args)
-  cmd.stripLineEnd()
   if cmd in answers:
     copyToClipboard(cmd)
-  elif cmd == "exit" or cmd == "":
+  elif cmd in exitSeq or cmd == "":
     return
   else:
     doCalculation(cmd)
 
-proc main() =
+proc go*() =
   var info = newInfo("Calculaturr")
   let args = @["exit"]
   let cmd = outputData(info, args)
@@ -32,5 +36,3 @@ proc main() =
     doCalculation(cmd)
   return
 
-if isMainModule:
-  main()

src/util/calendurr.nim

@@ -1,8 +1,10 @@
-import ../../globurrl
-import std/[times,osproc,re]
+import times
+import osproc
+import re
+
+import ../common
+import ../output
 
-const default_bg = blue
-const default_fg = white
 const default_format = "yyyy-MM-dd"
 const cal_pos_x = "20"
 const cal_pos_y = "20"
@@ -10,9 +12,6 @@ const cal_pos_y = "20"
 proc getObject(date: string): Info =
   var data = newInfo("Calendurr")
   data.full_text = date
-  data.border = default_bg
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
   return data
 
 proc newCalendar(): string =
@@ -24,13 +23,7 @@ proc newCalendar(): string =
           """
   return c
 
-proc openCalendar*(input: i3barInput) =
-  var c = newCalendar()
-  c = replace(c,re"%pos_x", $(input.x - 111))
-  c = replace(c,re"%pos_y", $input.y)
-  discard execCmd(c)
-
-proc dmenuCalendar() =
+proc openCalendar() =
   var c = newCalendar()
   c = replace(c,re"%pos_x", cal_pos_x)
   c = replace(c,re"%pos_y", cal_pos_y)
@@ -41,12 +34,9 @@ proc getDate*() =
   let data = getObject(date_today)
   let output = outputData(data)
   if output == date_today:
-    dmenuCalendar()
+    openCalendar()
 
-proc main() =
+proc go*() =
   getDate()
   
 
-if isMainModule:
-  main()
-

src/util/emurrji.nim

@@ -1,8 +1,10 @@
-import ../../globurrl
-import lib/emurrjilist
-import std/[re]
+import ../lib/emurrjilist
+import ../common
+import ../output
 
-proc main() =
+import re
+
+proc go*() =
   var info = newInfo("Emurrji")
   var args = getEmoji()
   args.add("exit")
@@ -16,5 +18,3 @@ proc main() =
       copyToClipboard(emoji)
   return
 
-if isMainModule:
-  main()

src/util/furrytime.nim

@@ -1,28 +1,7 @@
-import ../../globurrl
-import std/[times]
+import times
 
-const default_bg = lightblue
-const default_fg = black
-
-proc getHour(hr: int): string
-proc getMinute(min: int): string
-
-proc getFuzzyTime(): string =
-  let tm = now()
-  var hr = tm.hour()
-  let min = tm.minute()
-  var link = "past"
-  if min > 32 :
-    link = "to"
-    case hr:
-      of 23:
-        hr = 0
-      else:
-        hr = hr + 1
-  if min >= 58 or min <= 02:
-    return getHour(hr) & " " & getMinute(min)
-  else:
-    return getMinute(min) & " " & link & " " & getHour(hr)
+import ../model/info
+import ../output
 
 proc getHour(hr: int): string =
   case hr:
@@ -56,7 +35,7 @@ proc getHour(hr: int): string =
 proc getMinute(min: int): string =
   case min:
     of 58,59,0,1,2:
-      return "o'clock"
+      return "oclock"
     of 3,4,5,6,7,53,54,55,56,57:
       return "five"
     of 8,9,10,11,12,48,49,50,51,52:
@@ -72,14 +51,26 @@ proc getMinute(min: int): string =
     else:
       return "error"
 
+proc getFuzzyTime(): string =
+  let tm = now()
+  var hr = tm.hour()
+  let min = tm.minute()
+  var link = "past"
+  if min > 32 :
+    link = "to"
+    case hr:
+      of 23:
+        hr = 0
+      else:
+        hr = hr + 1
+  if min >= 58 or min <= 02:
+    return getHour(hr) & " " & getMinute(min)
+  else:
+    return getMinute(min) & " " & link & " " & getHour(hr)
+
 proc getObject(time: string): Info =
   var data = newInfo("Furry Time")
   data.full_text = time
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
-  #i3bar stuff
-  data.color = default_fg
-  data.border = default_fg
   return data
 
 proc show(time: string, next_fuzzy: bool = false) =
@@ -94,10 +85,7 @@ proc show(time: string, next_fuzzy: bool = false) =
         let t = now().format("HH:mm:ss")
         show(t, true)
 
-
-proc main() =
+proc go*() =
   let time = getFuzzyTime()
   show(time)
 
-if isMainModule:
-  main()

src/util/netwurrk.nim

@@ -1,10 +1,12 @@
-import ../../globurrl
-import std/[os,osproc,strutils,sequtils]
+import os
+import osproc
+import strutils
+import sequtils
+
+import ../common
+import ../output
 
-const default_fg = black
-const default_bg = purple
 const mng_cmd = "alacritty -e nmtui-connect" 
-const nics: seq[string] = @["wlan0","bridge0", "enp3s0","wlp2s0","enp0s20f0u3"]
 
 proc getIP(nic: string): string =
   let cmd = "ifconfig " & nic & " | grep inet | awk -F\" \" '{print $2}' | head -1 | awk '{print $1}'" 
@@ -29,10 +31,6 @@ proc getConnState(nic: string): (string, string) =
 
 proc getObject(): Info =
   var data = newInfo("Netwurrk")
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
-  # i3bar stuff
-  data.border = default_bg
   return data
 
 proc getNetInfo*(my_nics: seq[string])  =
@@ -59,8 +57,6 @@ proc getNics*(): seq[string] =
     return my_nics
   return @["no-nic"]
 
-proc main() =
+proc go*() =
   getNetInfo(getNics())
 
-if isMainModule:
-  main()

src/util/passwurrd.nim

@@ -1,5 +1,10 @@
-import ../../globurrl.nim
-import std/[os,osproc,re,strutils]
+import os
+import osproc
+import re
+import strutils
+
+import ../common
+import ../output
 
 const pw_store = getHomeDir() & ".password-store/"
 var passwords: seq[string] = @[]
@@ -20,12 +25,9 @@ proc getPasswords(): seq[string] =
 proc passwordToClipboard(password: string) =
   discard execCmd("pass show -c " & password)
 
-proc main() =
+proc go*() =
   var info = newInfo("Passwurrd")
   var pws = getPasswords()
   let output = outputData(info,pws)
   if output in passwords:
     passwordToClipboard(output)
-
-when isMainModule:
-  main()

src/util/pingclock.nim

@@ -1,15 +1,11 @@
-import ../../globurrl
-import std/[osproc, re, strutils]
+import osproc
+import re
+import strutils
+
+import ../common
+import ../output
 
 const host: string = "9.9.9.9"
-const default_bg = blue
-const default_fg = white
-const medium_bg = alert
-const medium_fg = black
-const alert_bg = alert
-const alert_fg = black
-const warning_bg = red
-const warning_fg = white
 
 let ping_re = re(r"time=[0-9.]+")
 const ping_cmd: string = "ping -4 -c 1 " & host
@@ -47,39 +43,13 @@ proc getObject(ping: float): Info =
   var data = newInfo("Ping Clurrk")
   data.full_text = text
   # i3bar stuff
-  data.color = default_fg
-  data.border = default_bg
-  data.background = black
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
-  case state:
-    of 1:
-      data.selected_bg = medium_bg
-      data.selected_fg = medium_fg
-      # i3bar stuff
-      data.color = medium_bg
-    of 2:
-      data.selected_bg = alert_bg
-      data.selected_fg = alert_fg
-      # i3bar stuff
-      data.color = alert_bg
-    of 9:
-      data.selected_bg = warning_bg
-      data.selected_fg = warning_fg
-      # i3bar stuff
-      data.color = warning_bg
-    else:
-      #default options already set
-      let ok = true
   return data
 
 
-proc main() =
+proc go*() =
  let ping = get_ping()
  let data = getObject(ping)
  let output = outputData(data)
  if output == data.full_text:
-   main()
+   go()
 
-if isMainModule:
-  main()

src/util/pw_generaturr.nim

@@ -0,0 +1,65 @@
+
+import httpclient
+import json
+import strutils
+import random
+
+import ../parser
+import ../model/pwgen
+import ../common
+import ../output
+
+var passwords: seq[string]
+proc getNumber(size: int = 4): string =
+  var num = ""
+  for _ in countup(1,size):
+    randomize()
+    let roll = rand(0..9)
+    num &= $roll
+  return num
+
+proc parsePasswords(body: string, digits: int) =
+  passwords = @[]
+  let j = body.parseJson
+  for pass in j.getElems:
+    var p = pass.getStr.capitalizeAscii
+    p &= getNumber(digits)
+    passwords.add(p)
+  
+proc getPasswords(pwgen: PWGen) =
+  var c = newHttpClient()
+  try:
+    let url = "https://random-word-api.herokuapp.com/word?number=" & $pwgen.number & "&length=" & $pwgen.word_len
+    let resp = c.get(url)
+    if resp.status == $Http200:
+      parsePasswords(resp.body, pwgen.digits)
+  except:
+    stderr.writeLine getCurrentExceptionMsg()
+
+proc getOutput(): Info =
+  var data = newInfo("PW Generaturr")
+  data.full_text = "Refresh"
+  return data
+
+proc goOutput(args: PWGen) =
+  let data = getoutput()
+  let selected = outputData(data,passwords)
+  if selected in passwords:
+    copyToClipboard(selected)
+  elif selected == "Refresh":
+    getPasswords(args)
+    goOutput(args)
+
+proc go*() =
+  echo "Getting passwords..."
+  let args = parsePWGenArgs()
+  getPasswords(args)
+  if args.to_terminal:
+    for pw in passwords:
+      echo pw
+  else:
+    echo "Outputting to app"
+    goOutput(args)
+
+if isMainModule:
+  go()

src/util/remminurr.nim

@@ -1,20 +1,18 @@
-import ../../globurrl
-import std/[os,osproc,tables,algorithm]
+import os
+import osproc
+import tables
+import algorithm
+
 import configparser
 
+import ../common
+import ../output
+
 const REMMINA_DIR = getHomeDir() & ".local/share/remmina"
-const SWITCH_WS = false
-const REMMINA_WS = "4"
 
 var sessions = initTable[string,string]()
 var names: seq[string] = @[]
 
-proc main()
-
-proc switchWorkspace() =
-  if SWITCH_WS and REMMINA_WS != "":
-    discard execCmd("i3-msg workspace number " & REMMINA_WS)
-
 proc getRemminaFiles(): seq[string] =
   if len(names) < 1:
     for file in walkFiles(REMMINA_DIR & "/*.remmina"):
@@ -38,6 +36,8 @@ proc startRemmina(conn: string) =
   let session = sessions[conn]
   discard execCmd("remmina -c " & quote(session))
 
+proc go*() # adding as need to refer back to it in selectRemmina
+
 proc selectRemmina(conn: string) =
   var info = newInfo("Remmina Choosurr : " & conn)
   let args = @["connect", "edit", "back"]
@@ -51,11 +51,9 @@ proc selectRemmina(conn: string) =
         editRemmina(conn)
         #switchWorkspace()
       of "back":
-        main()
+        go()
 
-
-
-proc main() =
+proc go*() =
   var info = newInfo("Remmina Choosurr")
   var args: seq[string] = getRemminaFiles()
   args.add("new")
@@ -68,7 +66,3 @@ proc main() =
   elif output in names:
     selectRemmina(output)
     return
-  return
-
-if isMainModule:
-  main()

src/util/screenshurrt.nim

@@ -1,23 +1,21 @@
-import ../../globurrl
-import std/[times,os,osproc,strutils,sequtils]
+import times
+import os
+import osproc
+import strutils
+import sequtils
+
+import ../common
+import ../output
+import ../parser
+import ../model/screenshot
 
-var screenshot_type = ""
-const TYPES = @["region", "fullscreen", "window"]
 const DATE_FORMAT = "yyyyMMdd-hhmmss"
 const FILENAME = "Screenshot-%d.png"
 const TEMP_DIR = "/tmp/"
-const SCREENSHOT_CMD = "maim -u %s --format png %f"
-var RUN_CMD = SCREENSHOT_CMD
 let DATE_STR = now().format(DATE_FORMAT)
-# where %s is an extra flag or process, i.e. xdotool for getting active window
-const ACTIVE_WINDOW_CMD = "-i $(xdotool getactivewindow)"
-const REGION_FLAG = "-s"
-var REGION_CMD = REGION_FLAG
-const CLIPBOARD_CMD = "xclip -selection clipboard -t image/png"
-var CLIP_CMD = CLIPBOARD_CMD
 
 proc saveToClipboard(filename: string) =
-  let cmd = "cat " & filename & " | " & CLIP_CMD
+  let cmd = "cat " & filename & " | " & CLIPBOARD_CMD
   let status = execCmd(cmd)
   if status == 0 and fileExists(filename):
     removeFile(filename)
@@ -54,42 +52,44 @@ proc showScreenshotSaveSel(filename: string) =
         openFile(filename)
   return
 
-proc showScreenshotTypeSel() =
+proc showScreenshotSizeSel(): ScreenshotSize =
   let info = newInfo("Screenshurrt type")
-  let args = concat(TYPES,@["---","exit"])
+  let args = concat(ScreenshotSizes(),@["---","exit"])
   let choice = outputData(info,args)
-  if choice in TYPES:
-    screenshot_type = choice
+  if choice.isScreenshotSize():
+    return choice.toScreenshotSize()
   elif choice == "---":
-    showScreenshotTypeSel()
+    return showScreenshotSizeSel()
   elif choice == "exit":
-    return
-  return
+    quit(0)
+  else:
+    quit(0)
 
-proc takeScreenshot() =
+proc takeScreenshot(ss: Screenshot) =
   let filename = TEMP_DIR & FILENAME.replace("%d",DATE_STR)
-  var cmd = RUN_CMD.replace("%f",filename)
-  case screenshot_type:
-    of "window":
-      cmd = cmd.replace("%s",ACTIVE_WINDOW_CMD)
-    of "region":
-      cmd = cmd.replace("%s",REGION_CMD)
+  var cmd = ss.tool.command
+  case ss.size:
+    of Window:
+      cmd = ss.tool.activeWindowCommand()
+    of Region:
+      cmd = ss.tool.regionCommand()
     else: #fullscreen
       cmd = cmd.replace("%s","")
-      # sleep for a bit otherwise the screen shot grabs dmenu as well
+      # sleep for a bit otherwise the screen shot could grabs dmenu as well
       sleep(1*500)
-
+  cmd = cmd.replace("%f",filename)
+  echo "Running command:\n" & cmd
   let status = execCmd(cmd)
   if status == 0:
     showScreenshotSaveSel(filename)
   return
 
+proc go*() =
+  var ss  = parseScreenshotArgs()
+  if ss.size == None:
+    ss.size = showScreenshotSizeSel()
+  if ss.size != None:
+    ss.takeScreenshot()
+
 if isMainModule:
-  for arg in args:
-    if arg in TYPES:
-      screenshot_type = arg
-      break
-  if screenshot_type == "":
-    showScreenshotTypeSel()
-  if screenshot_type != "":
-    takeScreenshot()
+  go()

src/util/temperaturr.nim

@@ -0,0 +1,54 @@
+import os
+import re
+import math
+import strutils
+
+import ../common
+import ../output
+
+proc getThermalZones(): seq[string] =
+  var zones: seq[string] = @[]
+  let dirname_re = re("thermal_zone[\\d]+")
+  let enabled_re = re("enabled")
+  for file in walkDir("/sys/class/thermal/"):
+    if file.path.contains(dirname_re):
+      let state = readFile(file.path & "/mode")
+      if state.contains(enabled_re):
+        zones.add(file.path)
+  return zones
+
+proc getTemp(zone: string): int =
+  let temp = strip(readFile(zone & "/temp"))
+  return parseInt(temp)
+
+proc getAverageTemp(zones: seq[string]): float =
+  var temps: int = 0
+  for zone in zones:
+    let temp = getTemp(zone)
+    temps += temp
+  let avgtemp = ceil((temps / len(zones))/1000)
+  return round(avgtemp,2)
+
+proc getObject(temp: float): Info =
+  var icon = ""
+  case temp:
+    of 40..59:
+      icon = ""
+    of 60.. 200:
+      icon = ""
+    else:
+      icon = ""
+  let main_text = icon & " " & $temp & "°C"
+  var data = newInfo("Temperaturr")
+  data.full_text = main_text
+  return data
+
+proc go*() =
+  let zones = getThermalZones()
+  let temp = getAverageTemp(zones)
+  let data = getObject(temp)
+  let option = outputData(data)
+  if option == data.full_text:
+    # Refresh
+    go()
+

src/util/tideurrl.nim

@@ -0,0 +1,110 @@
+#curl https://www.tidetimes.org.uk/exmouth-dock-tide-times-20190101 | grep -E -o ">((High|Low)|([0-9]+:[0-9]+)|([0-9]+\.[0-9]+m))"
+
+import re
+import httpclient
+import times
+import osproc
+import sequtils
+
+import ../common
+import ../parser
+import ../output
+import ../model/tides
+
+const icon: string = "🌊 "
+
+proc sortTides(tides: seq[Tide], is_tomorrow: bool = false): seq[Tide] =
+  let timenow = now()
+  var reltides: seq[Tide]
+  for tide in tides:
+    if timenow.format("HH:MM") <= tide.time and not is_tomorrow:
+      reltides.add(tide)
+    elif is_tomorrow:
+      reltides.add(tide)
+  return reltides
+
+
+proc getTideData(mytides: TideList, get_tomorrow: bool = false): seq[Tide] =
+  var tides: seq[Tide]
+  let fnd = re">((High|Low)|([0-9]+:[0-9]+)|([0-9]+\.[0-9]+m))"
+  var client = newHttpClient(timeout = 10000)
+  var link = replace(mytides.url,re"\%LOC",mytides.location)
+  if get_tomorrow:
+    let tomdate = now() + initTimeInterval(days = 1)
+    link &= "-" & tomdate.format("yyyyMMdd")
+  try:
+    # Remember to compile with -d:ssl else this won't work
+    let resp = client.request(link)
+    if resp.status != $Http200 or resp.body == "":
+      var data = newInfo("Tideurrl")
+      data.full_text =  "Error Response: " & resp.status & ":\nBody:" & resp.body
+      discard outputData(data)
+      return @[]
+    let data = resp.body
+    let times = findAll(data,fnd)
+    var tide: Tide
+    var column = 0
+    for idx,time in times:
+      if idx == 12:
+        break
+      let l = len(time) - 1
+      if time == ">High" or time == ">Low":
+        tide = Tide()
+        tide.state = time[1..l]
+        column = 1
+        continue
+      elif column == 1:
+        tide.time = time[1..l]
+        column = 2
+        continue
+      elif column == 2:
+        tide.height = time[1..l]
+        tides.add(tide)
+        column = 0
+        continue
+  except:
+    var data = newInfo("Tideurrl")
+    data.full_text =  "Unable to get Tide Data : " & getCurrentExceptionMsg()
+    discard outputData(data)
+  return tides
+
+proc getDesign(tl: TideList): Info =
+  var my_tides: seq[string] = @[]
+  my_tides.add(tl.location)
+  let tides = tl.tides
+  for tide in tides:
+    let str = icon & tide.state[0] & " " & tide.time & " " & tide.height
+    my_tides.add(str)
+  var data = newInfo("Tideurrl")
+  data.args = my_tides
+  return data
+
+proc getTides*(mytides: var TideList, get_tomorrow: bool = false) =
+  mytides.tides = mytides.getTideData(get_tomorrow)
+  mytides.tides = sortTides(mytides.tides, get_tomorrow)
+  if len(mytides.tides) == 0:
+    return
+  let data = getDesign(mytides)
+  var opt_tomorrow = "tomorrow"
+  if get_tomorrow:
+    opt_tomorrow = "back"
+  let args = concat(data.args,@["---",opt_tomorrow])
+  let output = outputData(data,args)
+  if output == "tomorrow":
+    getTides(mytides,true)
+  elif output == "back":
+    getTides(mytides)
+  elif output == "---" or output == "":
+    return
+  elif output in args:
+    let url = replace(mytides.url,re"\%LOC",mytides.location)
+    discard execCmd("xdg-open " & url)
+  else:
+    mytides.location = output
+    getTides(mytides)
+
+
+proc go*() =
+  var mytides = parseTideurrlArgs()
+  getTides(mytides)
+

src/util/volurrme.nim

@@ -1,5 +1,12 @@
-import ../../globurrl
-import std/[os,strutils,sequtils,osproc]
+import os
+import strutils
+import sequtils
+import osproc
+
+import ../common
+import ../output
+import ../parser
+import ../model/volume
 
 const audio_tools = @["ncpamixer", "pavucontrol"]
 const vol_cmd = "pamixer"
@@ -10,11 +17,14 @@ const vol_mute = vol_cmd & " -t"
 const vol_default_by = "5"
 const vol_get = vol_cmd & " --get-volume"
 const vol_get_mute = vol_cmd & " --get-mute"
-const default_bg = green
-const default_fg = black
 
 
-proc getCurrentVolume(): string {.gcsafe.}
+proc getCurrentVolume(): string =
+  let mute = execCmdEx(vol_get_mute)
+  if strip(mute.output) == "true":
+    return "muted"
+  let vol = execCmdEx(vol_get)
+  return vol.output
 
 proc checkVolume(volume: string): string =
   var vol = volume
@@ -24,11 +34,11 @@ proc checkVolume(volume: string): string =
     vol = checkVolume(vol)
   return vol
 
-proc getDesign(volume: string): (string,string) =
+proc getDesign(volume: string): string =
   let vol = checkVolume(volume)
   var icon = " "
   if vol == "muted":
-    return (icon & "muted", icon & "muted")
+    return icon & "muted"
   let pcnt = parseInt(strip(vol))
   case pcnt:
     of 85..100:
@@ -42,15 +52,7 @@ proc getDesign(volume: string): (string,string) =
     else:
       icon = " "
   let main_text = icon & $pcnt & "%"
-  let text = "<span size=\"x-large\">" & icon & "</span>" & $pcnt & "%"
-  return (text, main_text)
-
-proc getCurrentVolume(): string =
-  let mute = execCmdEx(vol_get_mute)
-  if strip(mute.output) == "true":
-    return "muted"
-  let vol = execCmdEx(vol_get)
-  return vol.output
+  return main_text
   
 proc volumeUp() =
   let cmd = replace(vol_up, "%v", vol_default_by)
@@ -63,18 +65,11 @@ proc volumeDown() =
 proc volumeMute() =
   discard execCmd(vol_mute)
 
-proc getVolume*(run_once: bool = false) =
+proc getVolume*() =
   let vol = getCurrentVolume()
-  let (text, main_text) = getDesign(vol)
+  let main_text = getDesign(vol)
   var data = newInfo("Volurrme")
   data.full_text = main_text
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
-  # i3bar stuff
-  data.html_text = text
-  data.color = foreground
-  data.border = green
-  data.background = black
   let args = concat(@["up", "down", "mute", "---", "exit", "---"],audio_tools)
   let option = outputData(data,args)
   if option == "":
@@ -101,26 +96,20 @@ proc getVolume*(run_once: bool = false) =
     try:
       let vol = parseInt(option)
       let cmd = replace(vol_set, "%v", $vol)
-      let x = execCmd(cmd)
+      discard execCmd(cmd)
       getVolume()
     except:
       echo getCurrentExceptionMsg()
       getVolume()
 
-proc main() =
-  getVolume()
-
-if isMainModule:
-  block start:
-    for arg in args:
-      case arg:
-        of "up":
+proc go*() =
+  let arg = parseVolArgs()
+  case arg
+  of VolUp:
     volumeUp()
-          break start
-        of "down":
+  of VolDown:
     volumeDown()
-          break start
-        of "mute":
+  of VolMute:
     volumeMute()
-          break start
-    main()
+  else:
+    getVolume()

src/util/wirelurrs.nim

@@ -1,9 +1,11 @@
-import ../../globurrl
-import std/[os,osproc,strutils,sequtils]
+import os
+import osproc
+import strutils
+import sequtils
+
+import ../common
+import ../output
 
-const default_bg = purple
-const default_fg = white
-const wlan_nics: seq[string] = @["wlan0"]
 const get_ssid_cmd = "iwgetid -r"
 const mng_cmd = "alacritty -e nmtui-connect"
 
@@ -28,9 +30,6 @@ proc getWifi(nic: string): (string, string) =
 
 proc getObject(): Info =
   var data = newInfo("Wirelurrs")
-  data.border = purple
-  data.selected_bg = default_bg
-  data.selected_fg = default_fg
   return data
 
 proc getWifiInfo*(nics: seq[string])  =
@@ -41,6 +40,8 @@ proc getWifiInfo*(nics: seq[string])  =
   let data = getObject()
   let args = concat(lst,@["---", "manage","exit"])
   let output = outputData(data, args)
+  if output in lst:
+    discard execCmd(mng_cmd)
   case output:
     of "manage":
       discard execCmd(mng_cmd)
@@ -49,16 +50,20 @@ proc getWifiInfo*(nics: seq[string])  =
     of "---":
       return
 
-proc main() =
+proc getWiFiNICs(): seq[string] =
   var my_nics: seq[string] = @[]
-  for nic in wlan_nics:
-    if dirExists("/sys/class/net/" & nic):
+  for path in walkDir("/sys/class/net/"):
+    if dirExists(path.path & "/wireless"):
+      let nic = path.path.replace("/sys/class/net/","")
       my_nics.add(nic)
+  return my_nics
+
+proc go*() =
+  let my_nics = getWiFiNICs()
   if len(my_nics) > 0:
     getWifiInfo(my_nics)
   else:
-    switchTwmMode()
-    echo "No WLAN"
+    var data = getObject()
+    data.full_text = "No WLAN"
+    discard outputData(data)
 
-if isMainModule:
-  main()

src/wmtools.nim

@@ -0,0 +1,11 @@
+# This is just an example to get you started. A typical binary package
+# uses this file as the main entry point of the application.
+#
+
+import common
+import parser
+import dispatcher
+
+when isMainModule:
+  parseArgs()
+  dispatch myConfig

temperaturr/src/temperaturr.nim

@@ -1,72 +0,0 @@
-import ../../globurrl
-import std/[os,re,math,strutils]
-
-const default_bg = green
-const default_fg = black
-const alert_bg = yellow
-const alert_fg = black
-const warning_bg = red
-const warning_fg = black
-
-proc getThermalZones(): seq[string] =
-  var zones: seq[string] = @[]
-  let dirname = re("thermal_zone[\\d]+")
-  for file in walkDir("/sys/class/thermal/"):
-    if contains(file.path,dirname):
-      let state = readFile(file.path & "/mode")
-      if contains(state,re"enabled"):
-        zones.add(file.path)
-  return zones
-
-proc getTemp(zone: string): int =
-  let temp = strip(readFile(zone & "/temp"))
-  return parseInt(temp)
-
-proc getAverageTemp(zones: seq[string]): int =
-  var temps: int = 0
-  for zone in zones:
-    let temp = getTemp(zone)
-    temps += temp
-  let avgtemp = ceil((temps / len(zones))/1000)
-  return toInt(round(avgtemp,0))
-
-proc getObject(temp: int): Info =
-  var icon = ""
-  var bg_col = default_bg
-  var fg_col = default_fg
-  case temp:
-    of 40..59:
-      bg_col = alert_bg
-      fg_col = alert_fg
-      icon = ""
-    of 60.. 200:
-      bg_col = warning_bg
-      fg_col = warning_fg
-      icon = ""
-    else:
-      bg_col = default_bg
-      fg_col = default_fg
-      icon = ""
-  let text = "<span foreground='" & bg_col & "'>" & icon & "</span> " & $temp & "°C"
-  let main_text = icon & " " & $temp & "°C"
-  var data = newInfo("Temperaturr")
-  data.full_text = main_text
-  data.selected_bg = bg_col
-  data.selected_fg = fg_col
-  # i3bar stuff
-  data.html_text = text
-  data.color = bg_col
-  data.border = bg_col
-  return data
-
-proc main() =
-  let zones = getThermalZones()
-  let temp = getAverageTemp(zones)
-  let data = getObject(temp)
-  let option = outputData(data)
-  if option == data.full_text:
-    # Refresh
-    main()
-
-if isMainModule:
-  main()

temperaturr/temperaturr.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Display temp in dmenu"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["temperaturr"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

tideurrl/src/tideurrl.nim

@@ -1,106 +0,0 @@
-#curl https://www.tidetimes.org.uk/exmouth-dock-tide-times-20190101 | grep -E -o ">((High|Low)|([0-9]+:[0-9]+)|([0-9]+\.[0-9]+m))"
-import ../../globurrl
-import std/[re,httpclient,times,osproc,sequtils]
-
-# TODO:
-#      Pass location in as variable
-
-const url* = "https://www.tidetimes.org.uk/%LOC-tide-times"
-const loc* = "exmouth-dock"
-const icon: string = "🌊 "
-
-type 
-  Tide = ref object
-    State: string
-    Time: string
-    Height: string
-    Tomorrow: bool
-  TideList = ref object
-    Tides: seq[Tide]
-    LastUpdated: DateTime
-
-proc sortTides(tides: seq[Tide], is_tomorrow: bool = false): seq[Tide] =
-  let timenow = now()
-  var reltides: seq[Tide]
-  for tide in tides:
-    if timenow.format("HH:MM") <= tide.Time and not is_tomorrow:
-      reltides.add(tide)
-    elif is_tomorrow:
-      reltides.add(tide)
-  return reltides
-
-
-proc getTideData(get_tomorrow: bool = false): seq[Tide] =
-  var tides: seq[Tide]
-  let fnd = re">((High|Low)|([0-9]+:[0-9]+)|([0-9]+\.[0-9]+m))"
-  var client = newHttpClient()
-  var link = replace(url,re"\%LOC",loc)
-  if get_tomorrow:
-    let tomdate = now() + initTimeInterval(days = 1)
-    link &= "-" & tomdate.format("yyyyMMdd")
-  try:
-    # Remember to compile with -d:ssl else this won't work
-    let data = client.getContent(link)
-    let times = findAll(data,fnd)
-    var tide: Tide
-    var column = 0
-    for idx,time in times:
-      if idx == 12:
-        break
-      let l = len(time) - 1
-      if time == ">High" or time == ">Low":
-        tide = Tide()
-        tide.State = time[1..l]
-        column = 1
-        continue
-      elif column == 1:
-        tide.Time = time[1..l]
-        column = 2
-        continue
-      elif column == 2:
-        tide.Height = time[1..l]
-        tides.add(tide)
-        column = 0
-        continue
-  except:
-    echo "Unable to get Tide Data : " & getCurrentExceptionMsg()
-  return tides
-
-proc getDesign(tides: seq[Tide]): Info =
-  var my_tides: seq[string] = @[]
-  for tide in tides:
-    let str = icon & tide.State[0] & " " & tide.Time & " " & tide.Height
-    my_tides.add(str)
-  var data = newInfo("Tideurrl")
-  data.border = black
-  data.args = my_tides
-  return data
-
-proc getTides*(get_tomorrow: bool = false) =
-  var mytides = TideList()
-  mytides.Tides = getTideData(get_tomorrow)
-  mytides.Tides = sortTides(mytides.Tides, get_tomorrow)
-  if len(mytides.Tides) == 0:
-    getTides(true)
-    return
-  let data = getDesign(mytides.Tides)
-  var opt_tomorrow = "tomorrow"
-  if get_tomorrow:
-    opt_tomorrow = "back"
-  let args = concat(data.args,@["---",opt_tomorrow])
-  let output = outputData(data,args)
-  if output == "tomorrow":
-    getTides(true)
-  elif output == "back":
-    getTides()
-  elif output == "---":
-    return
-  elif output in args:
-    let url = replace(url,re"\%LOC",loc)
-    discard execCmd("xdg-open " & url)
-
-proc main() =
-  getTides()
-
-if isMainModule:
-  main()

tideurrl/tideurrl.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Display local tides in dmenu"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["tideurrl"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

translaturr/nim.cfg

@@ -1 +0,0 @@
--d:ssl

volurrme/volurrme.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Display and control volume with dmenu"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["volurrme"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

wirelurrs/wirelurrs.nimble

@@ -1,13 +0,0 @@
-# Package
-
-version       = "0.1.0"
-author        = "Paul Wilde"
-description   = "Display and control WLAN state with dmenu"
-license       = "GPL-3.0-or-later"
-srcDir        = "src"
-bin           = @["wirelurrs"]
-
-
-# Dependencies
-
-requires "nim >= 1.6.6"

wm_tools.nimble

@@ -0,0 +1,16 @@
+# Package
+
+version       = "2.0.1"
+author        = "Paul Wilde"
+description   = "A set of informational tools"
+license       = "AGPL-3.0-or-later"
+srcDir        = "src"
+bin           = @["wmtools"]
+
+
+# Dependencies
+
+requires "nim >= 2.0.0"
+requires "parsetoml >= 0.7.1"
+requires "argparse"
+requires "configparser"